Index

Lawn Aeration

in the USA

Lawn owners often don’t realize the hazards of soil compaction. Insects, diseases, nematodes, improper watering and a lack of fertilizer are often blamed for a lawn’s decline when the real culprit is compaction. The problem starts when particles in the top 4 inches of the soil are compressed, reducing the pore spaces between them and impeding the movement of air, water and nutrients to the grass roots. This, in turn, stresses the grass plants, making them less able to compete with weeds and slow to recuperate from injury. In time a compacted lawn needs renovation.

Compacted soil contributes to the accumulation of thatch because restricted oxygen levels in highly compacted soils or finely textured soils, particularly heavy clays, impair the activity of earthworms and other thatch-decomposing organisms. Left unmanaged, thatch can lead to serious maintenance and pest problems. Thatch accumulates faster on compacted soils, heavy clay soils and subsoils that are disturbed during building processes than on well-aerified soils. Therefore, some lawns may require frequent aerification to aid in thatch control.

If soil is compacted, the solution is straight-forward: aerify. The practice of physically removing cores of soil and leaving holes or cavities in the lawn is defined as core aeration or aerification. Aerifying a lawn benefits compacted soil in the following ways:

Loosens compacted soil and increases the availability of water and nutrients.

Enhances oxygen levels in the soil, stimulating root growth and enhancing the activity of thatch-decomposing organisms.
While removing cores of soil, the spoons or tines also sever roots, rhizomes and stolons. Grass plants are stimulated to produce new shoots and roots which "fill up" the holes in the lawn and increase the density of the turf.

Reduces water runoff.

Increases the lawn’s drought tolerance and improves its overall health.

Aerification of home lawns corrects soil problems but generally is not a routine practice. The type of grass will determine whether to aerify in the fall or in the summer. Lawns composed of cool-season grasses such as Kentucky bluegrass and tall fescue are best aerified in the fall, when there is less heat stress and danger of invasion by weedy annuals. Allow at least four weeks of good growing weather to help the plants recover. Warm-season grasses such as zoysia, centipede, carpetgrass, St. Augustine and bermudagrass, on the other hand, are best aerified in late spring and summer, when they are actively growing. With either type of grass, choose a day when temperatures are mild and soil is moderately moist, which makes the soil easier to penetrate. Avoid aerifying a wet soil as it is messy and leads to further compaction of the soil as well. If the soil sticks to your shoes or if the core sample you take sticks to your probe, you should wait until it dries out some before starting the job.

Aerification is not expensive. The simplest and cheapest way to aerify a small lawn is with a spading fork. Push the tines into the soil as far as you can (at least 4 inches) and rock the fork back and forth to enlarge the holes. This movement will loosen up the soil and make room for new grass roots. The only limitation to using a spading fork is that at the same time that you are making a hole you are also forcing soil particles around the hole closer together, causing more compaction.

For a few dollars you can purchase a sod-coring tool that does a better job. Like the spading fork, this tool is easy to use and ideal for small areas. Unlike the fork, the sod-coring tool removes cores of soil from the lawn instead of pushing the soil aside to create holes. The earthen plugs that are deposited on the lawn after each successive plunge actually benefit the lawn. They contain microorganisms that help to decompose any layers of thatch present.

Aerifying larger lawns requires a power-driven core aerator or aerifier, which can be rented at lawn and garden supply centers. The working parts of these machines are spoon-shaped tines or hollow tubes. As the tubes are driven into the lawn, cores of soil are removed from the ground and strewn across the lawn. Both types of tines work equally well, but the hollow tine makes a somewhat cleaner hole than the spoon type and brings up less soil. The tine size varies up to three-quarters of an inch and in depth of penetration up to 3 inches, depending on the manufacturer’s specifications. The closer tine placement removes more soil, exposes more soil surface area for water and fertilizer movement and alleviates compaction quicker than the wider tine spacing.

Penetration depth depends on soil type, soil moisture, tine diameter and the weight and power of the aerifier. Soil cores should be left on the lawn to be broken up by rainfall and traffic. If their appearance bothers you, you can speed up their disappearance by raking them into the grass. Whichever machine you use, go over the lawn twice, once in one direction, then in perpendicular direction for best results.

Aerification can be combined with seeding, particularly on sparse or bare areas. If you are going to seed the lawn, you should make six to 10 passes over the area with a machine. You need to produce a number of holes, at least 4 inches apart, to improve the appearance and density of the stand. Allow the holes about a month to heal before seeding. If you overseed immediately after coring, seeds that land in or near the aerifier holes will germinate and grow much better than those between the holes, giving the lawn an uneven, speckled appearance. With a fraction of the effort and expense of tilling up the entire area, combining aerification with seeding will give the lawn a brand-new look.